Lettering Treasure Cutting Automatic Leveling Material CNC Engraving Machine Stone Engraving Gem Pattern CNC Milling Machine

feature:

1. The product production process automatically adapts to the layout, which can avoid failures caused by uneven layout or insufficient mounting, and improve the yield rate.

2. The leveling accuracy is within 0.1-0.01mm, which greatly improves work efficiency and machine performance

3. Elastic material, light weight, shockproof and anti-loose

4. It is convenient to disassemble the screws by hand, no need to disassemble frequently, the screws can be loosened

5. Automatically optimize the path of the engraving machine, intelligently detect faults, and the surface is smooth, eliminating tedious operations

6. The engraving is automatically completed, and the knife height can be adjusted intelligently

Specification:

Project type: CNC engraving machine

Built-in lithium battery capacity: 700mah

packing list:

1 X CNC engraving machine

1 set of clamping screws

1 X clamp

1 X fixed position

1 receiver

1 X USB data cable

1 X Disk

Name: Lettering treasure

Classification: Standard Edition, Smart Edition, Professional Edition

Leveling degree: up to 0.1-0.01MM

Product category: engraving machine lettering

Product introduction: The purpose of Bingtai Engraving Software; It is mainly suitable for all kinds of engraving machines, such as engraving, line engraving, relief sculpture, etc., where the flatness of the board surface is relatively high. The processing program generated by Bingtai Engraving Software can automatically adapt to the surface to be engraved, so it can avoid the engraving failure caused by the uneven surface or the level of placement, and improve the yield. The leveling accuracy can reach within 0.1-0.01MM, which greatly improves work efficiency and machine performance. The small characters that are difficult to engrave can be engraved with confidence after using the Bingtai engraving treasure, and there is no need to worry about half-characters or slurred characters. In order to make the software work well, the Bingtai engraving software is also equipped with a few simple small accessories: a digital display for height measurement, a special data cable, a digital displ ay bracket, and a USB that connects the digital display to the computer. Extension cord.

Humanized design

Elastic material, light, shockproof, anti-loosening, hand-tightened screws, convenient for disassembly and assembly without frequent disassembly, just loosen the hand-tightened screws and flip upwards.

Fully automated

Automatically optimize the path of the engraving machine, intelligently detect faults, and the curved surface is smooth, eliminating complicated operations; the entire process of engraving is automatically completed, and the height of the knife is intelligently adjusted to truly realize unmanned management

Fast engraving speed

Optimize the engraving path, improve the engraving speed of the engraving machine, during the measurement can modify the height of the knife per second can be measured at least 2 points, leveling operation only 1 minute, single test of up to 30 pieces.