- Químico Hign-em causa: Nenhum
- Tipo de Item: Isolante térmico
- Nome da marca: LERDGE
- Origem: CN (Origem)
Lerdge ACF NFEP FEP Release Film Heat Resistance High Transmittance Resin Film For Creality LD006 Halot-sky 3D Printer parts
Product Parameter：
Product Name:LERDGE Photo Curing 3d printer release film solution
Product Type:FEP/NFEP/ACF Release Film
ACF Release film:Imported raw materials,Near "0" draft force,Higher quality printing,Longer life
FEP Release film:Low cost,smooth surface,High transmittance,Double sided protective film protection
NFEP Release film:Raw materials imported from Japan,High transmittance,Less release force,Double sided protective film protection
7 Advantages,Sophisticated Technology
①High Transmittance
Over 95% high transmittance
②Strong Ductility
300% elongation
③Good Flexibility
10000 bend tests
④High Temperature
200°C long-term tolerable
⑤Stable Release Force
Uniform coating
⑥High Cleanliness
Dust free workshop production
⑦Flat Surface
No wrinklesscratches bubbles
Instruction:
Note:Remove the protective film before use
Installation steps:
1.Remove 8 screws and remove the steelring from the resin tank
2.Remove 24 screws.Separate the steel ring and replace the FEP membrane
3.Place the new FEP film between the twsteel rings, and then install the 24screws back. You may need to screw in firmly
4.Install the steel ring back into theresin tank to ensure that the FEP Film is clean
Avaliações
Ainda não existem avaliações.