KWHUD HUD OBD2 Display On-board Computer Car GPS Speedometer RPM Multi Meter for Toyota Corolla/Yaris/Camry/Rush/Vitz After-2008

Compatible With:

For Toyota RAV4 2009-2024 Gasoline;

For Toyota REIZ 2008-2024 Gasoline;

For Toyota VIOS 2008-2024 Gasoline;

For Toyota Yaris L 2013-2024 Gasoline;

For Toyota Highlander 2009-2024 Gasoline;

For Toyota LEVIN 2008-2024 Gasoline;

For Toyota Corolla 2008-2024 Gasoline;

For Toyota Corolla Fielder 2008-2024 Gasoline;

For Toyota CROWN 2008-2024 Gasoline;

For Toyota Camry 2008-2024 Gasoline;

For Toyota Yaris 2008-2024 Gasoline;

For Toyota COROLLA EX 2008-2024 Gasoline;

For Toyota PRADO 2008-2024 Gasoline;

For Toyota Rush 2008-2024 Gasoline;

For Toyota Rush TRD Sportivo 2008-2024 Gasoline;

For Toyota Innova Reborn 2008-2024 Gasoline;

For Toyota Passo 2008-2024 Gasoline;

For Toyota Etios xls 2008-2024 Gasoline;

For Toyota Fortuner 2008-2024 Gasoline;

For Toyota Spade 2008-2024 Gasoline;

For Toyota Vitz 2008-2024 Gasoline;

Incompatible With:

1. All Cars before 2007.------No

2. All Diesel/Hybrid/Electric Vehicles, Pickup Trucks, Passenger Cars, Motorcycle, Bicycle etc.-----No

3. Tips: As for the other car models, please ask customer service before placing an order. and Please send us your Car Model/ Year of Production/ Engine Capacity/ Engine Type(Gasoline/ Diesel/ Hybrid).

OBD2+GPS Dual Mode Display Function:

1.OBD Mode:Speed(KM/H,MPH), RPM, Time, Coolant Temperature, Voltage, Fuel Consumption, Driving Time, Driving Distance, Brake Test, Turbo Pressure(Note: some cars will not display),Clear Fault Code, Accelerated Test, Oil Temperature, Engine Load.

2.GPS Mode:Speed(KM/H,MPH), Time, Voltage, Compass, Driving Time, Driving Distance, Brake Test, Accelerated Test, Satellite Number, Altitude.

Six Alarm Function:

Speed Alarm, High Temperature Alarm, Low Voltage Alarm, High Voltage Alarm, Fatigue Driving Alarm, Vehicle Failure Alarm.

Feature:

1.-OBD2 + GPS Dual System.

2. -Two installation methods:1) stand on dashboard, 2) upside down on windshield

3. -The sucker bracket can be rotated in 360 degree to adjust the visual angle and height.

4. -Speed Unit KM/H & MPH Switch freely;

5. -Fuel consumption units: L/100KM, L/H;

Engine is on but Stationary (Speed is at 0): show instant fuel consumption, unit is L/H.

When car is in motion, the interface will automatically change into KM/L or L/100KM as your setting;

6.-The first HUD to show all data of OBD2+GPS dual mode, no need to switch working system if OBD2 protocol is compatible.

7.-With Multiple Ambient Light: you can choose the light you prefer.

8.-5 kinds of different interface, you can choose any display interface you prefer.

9.-Setting Language: English.

10.-Item Size: 104*77*27mm/ 4.10*3.04*1.09inch

11.-Screen Size: 3.5inch HD 480*320 IPS Screen.

How To Install:

1. Put the vehicle in "P"or "N" gear, pull up the handbrake and start the vehicle to ensure that the vehicle is in an idle state;

2. Connect the hud to your car obd2 socket;

3. Turn on the power switch of the hud, the system will automatically scan the vehicle data, it takes about 3 minutes, please wait patiently;

4. When screen displays the water temperature and fuel consumption of the vehicle, the initialization is complete, and it can be used normally.