KWHUD HUD Head Up Display Car OBD2 Digital Speedometer RPM Tacho Volt Water Temp Meter Windshield Speed Projector Car Electronic

-Support OBD2 Protocol:

ISO14230-4(KWP2000), ISO15765-4(CAN-BUS), ISO9141-2, the others are not.

-Compatible with

For 90% Small Gasoline Cars after 2008.(Not for Suzuki, Not for Ssangyong, Not for Renault, Not for Mazda, Not for Fiat, Not for Dayoo, Not for Dodge, etc.)

-Incompatible With:

1.Not for All Cars before 2007.
2.Not for All Diesel/Hybrid/Electric Vehicles, Pickup Trucks, Passenger Cars, Motorcycle, Bicycle etc.

3. Tips: The other car model please contact customer service before placing an order.

Product Parameter

Model: i9
Working Voltage: 9-16V
Alarm Sound Level: ≥30db(A)
Product Size: 131*85*14mm / 5.16*3.35*0.55 inch
Color: Black
Light Color: Multicolor Light

Display Function

Speed, RPM, instant water temperature, instant voltage, instant fuel consumption, fuel consumption per 100km, average fuel consumption, driving distance, driving time, auto sensor brightness, clear fault code, Beijing time, kilometer-mile switch

Alarm Function

Speed alarm, RPM alarm, water temperature alarm, voltage alarm, fatigue driving reminder, fault reminder, oil quantity reminder

Three Operation Mode

Automatic Brightness

You can choose auto-sensing to adjust the brightness automatically or choose to adjust the brightness of 1-20 layers manually.

Windshield Projector

Safety driving, keep your eyes ahead, no need to down your head to see dashboard while driving

Color Projection

Adopt LED high and bright color screen, anti-glare, no fear of direct glare.

Screen Size: 5.5 inch

Real Occasion

Package Included:

1 x i9 Head Up Display

1 x 2M OBD Cable

1 x Reflective Film

1 x User Manual (in English）

How To Install:

1. Put the vehicle in "P"or "N" gear, pull up the handbrake and start the vehicle to ensure that the vehicle is in an idle state;

2. Connect the hud to your car obd2 socket;

3. Turn on the power switch of the hud, the system will automatically scan the vehicle data, it takes about 3 minutes, please wait patiently;

4. When screen displays the water temperature and fuel consumption of the vehicle, the initialization is complete, and it can be used normally.

How to Adjust the Speed Unit to MPH:

1.Turned off the device;

2. Move the pulley key up and turn on the switch; When '01' appears, release your hand.

3.Press the OK key (vertically short press the pulley key) to enter, and '1' (KM/H) will appear.

4. Adjust the number to '2' (MPH) by moving the pulley key up and down, and then press the OK key to save. At this point, the mileage system will be changed, and the machine will automatically return to the first interface.

5.Turn off the device and turn on again，the device will automatic scanning and complete the setting.