Material: PFA (nFEP)

Color: Transparent

Size: 280*200*0.127mm

Applicable Models:

· For Creality Series：

HALOT-PLAY, LD-006, HALOT-SKY 2022, HALOT-LITE, HALOT-RAY, HALOT ONE PLUS, HALOT ONE PRO

· ANYCUBIC Series:

Photon Mono M5s Pro, M5s, M5, Photon Mono M7 Pro, M7, Photon Mono X 6Ks, Mono X 6K, Photon M3 Plus, Photon Mono X, Photon Mono X2

· ELEGOO Series:

Saturn 3 Ultra, Saturn 4 Ultra，Saturn 2, Saturn 3, Saturn 4, Saturn, Saturn S, Mars 4 Max

· Phrozen Series: Sonic Mini 8K S, Sonic Mini 8K, Sonic 4K 2022, Sonic mini 4K, Sonic 4K, Shuffle 4K, Sonic mini, Sonic, Shuffle Lite, Shuffle 2019, Shuffle 2018, Phrozen Make

· UniFormation Series: GK2/ GKtwo

How to Choose - nFEP or FEP?

When your prints are relatively simple and printing is not frequent, please choose traditional FEP film, because it can meet those basic needs and it is cheaper. But if you print more frequently, the prints are more complex, or you want to obtain more precise printing effects, then nFEP will be more suitable for you. Because nFEP release film with following advantages.

Excelent Printing Details

Upgraded nfep film ensures better printing accuracy

High transmittance More than 95% Transmittance

The 3D NFEP film,with high transmittance over 95%, makes more perfect printing.Transmittance exceeds 95%

Tougher and Stronger

Installation steps

Firstly, remove screws at the bottom ofresin vat and take out the used release film which needs to be replaced.

Then place the new release film betweensteel rims.

Firstly, remove screws at the bottom ofresin vat and take out the used release film which needs to be replaced.

The installed release film is shown inpicture