IPS LCD Screen For PSP1000 Game Console Special Cable For Sony PSP 1000 to IPS Screen LCD Highlight High Brightness Kits

1. Using high quality card connector, no pressure screen design!
2. No damage to the motherboard installation, no need to solder the backlight board.
3. Non-destructive screen cable installation, without cutting and punching.
4. Installation is simple, as long as the machine can be disassembled!
5. Give the screen gasket in one step.
6. Short the two points, you need to short the two contacts above the 34 pin, in fact, PSP1000 has this pin signal, and the pad is not connected. Connect directly with solder. The location is shown in the two motherboard schematics. There are slight differences between the two different versions of the motherboard. From the first foot on the right side of the row seat to the seventh foot from the left, follow the lead to find

NOTE:Need to short the two contacts above the 34 pin of the motherboard

The installation instructions are as follows

installation steps:
1. Welding two points shorted
2. Insert the screen cable
3. Install the backlight cable
4. Insert the motherboard 40P card holder