- Battery Included: No
- High-concerned chemical: None
- DIY Supplies: Woodworking
- Brand Name: XCMCU
- Origin: Mainland China
- Display Size: 2.9 Inches & Under
1.1 Introduction to the system
XC799D Multi-functional CNC system for engraving, milling, drilling and tapping is a new generation of CNC system developed by our company. It supports engraving, milling, drilling and tapping. It adopts 32-bit high-performance microprocessor, real-time multi-tasking control technology and hardware interpolation technology, full linkage, high-speed small line segment forward-looking algorithm. 0.001mm interpolation accuracy, the highest speed of 30 meters / min. It is the best choice for engraving machine, machining center, drilling and tapping center, CNC milling machine and CNC drilling machine.
XC799D CNC system hardware and software features.
★Based on 32-bit microprocessor, full linkage, 0.001mm interpolation accuracy, maximum speed 30m/min, support direction + pulse and orthogonal pulse.
★Using 8.4-inch color widescreen LCD, resolution 800 x 600, Windows interface style. Equipped with 8 soft function keys, easy to operate. Provide parameter classification, alarm logs, system diagnostics and other rich display interface, convenient debugging and maintenance.
★International standard G instruction, compatible with FANUC system instruction.
★40 kinds of G commands, support drilling cycle and tapping cycle.
★Supports RS485 absolute servo.
★Parts program full-screen editing, built-in 500M massive program space, can store N parts program.
★With USB interface, support U disk file reading and writing, data backup.
★Input 24 (expandable to 96) points, output 24 (expandable to 96) points (customized), flexible and convenient.
★Chinese and English operation interface, complete help information, more convenient operation.
★The system uses interpolation front acceleration and deceleration control.
★ Supports knife length and radius knife patches.
★Support handwheel trial processing, convenient program debugging.
★Support multi-level operating privileges, convenient equipment management, with time-limited system lock function.
★Support UG, Mastercam, PowerMill, FeatureCAM, ArtCAM, JDPaint, Wentai and other third-party software G code files.
★Support self-programming tool magazine, flexible use of a variety of tool magazines.
1.2 technical specifications
basic functions | |
control the number of axes | 3~6轴 |
Number of linked axes | Full linkage |
Knife storage | Support,need to edit the code of the cutter |
Spindle | 2 analog spindles, of which spindle 1 can be used as a digital spindle (occupying one digital axis) |
spindle monitoring | have |
minimum command unit | 0.001 mm |
maximum command value | ±999999999 x minimum command unit |
Rapid feed speeds | 30,000 mm/min |
Rapid feed multiplier | F0, 25%, 50%, 75%,100% |
Pulse mode | 1:Direction+Pulse 2:Orthogonal Pulse (if the driver supports, recommended, stronger anti-interference, higher moderation) 3:Double Pulse, compatible with the old stepper driver |
Maximum frequency | 100Khz,250Khz,500Khz can be set. (500KHz only orthogonal output pulse) |
Feed rate multiplier | 0～150% |
electronic gear ratios | 1～65535: 1～65535 |
Automatic acceleration and deceleration | have |
High-speed small line segment look-ahead algorithms | have |
Handwheel test machining | have |
Positioning | G00 (Linear interpolation positioning possible) |
Interpolation | Linear (G01), circular (G02/G03/G12), helical interpolation |
return to the reference point | Automatic return to reference point (G28) |
LCD | 8.4-inch TFT LCD screen, resolution 800 x 600 |
MDI soft keys | 8 |
Single-step feed | x1，x10，x100 |
communication interface | USB flash drive interface |
external handwheel interface | have |
I/O interface | 24/24 (expandable to 96/96) |
Pause (seconds) | have |
Quasi-parking status | have |
Permission to stop | have |
Storage trip check | have |
MDI operation | Yes, supports multi-segment operation |
Reset | have |
Jump section switch | have |
single-segment operation | have |
program protection switch | have |
self-diagnostic function | have |
Emergency stop | have |
Power supply | Single-phase AC220V+10%-15%,50Hz±1Hz |
coordinate system | Machine coordinate system (G53), workpiece coordinate system (G92, G54~G59), local coordinate system (G52), coordinate system plane designation |
automatic coordinate system setting | have |
decimal entry | have |
Auxiliary functions | |
Auxiliary functions | M2 digit, M code customization, manual/MDI/automatic way to control the spindle forward, reverse, stop; control the coolant start and stop; control the lubrication start and stop, etc., |
spindle functions | |
spindle functions | Dual spindle (single digital spindle) |
digital spindle | Spindle 1 support, occupying one digital axis (Z-axis is not supported), more stable speed. |
Tapping | Support |
spindle analog output | Yes, twin spindles |
tool functions | |
tool functions | Support automatic tool change, support centering tool setting, three-point centering tool setting |
tool compensation memory | -9999.999~9999.999,99 |
tool compensation | Knife length and radius patches |
editing operations | |
editing functions | parameters, diagnostic per-position input, program editing, MDI multi-segment execution |
storage capacity | 500M |
number of stored programs | 500 |
the display of program names | Chinese, English, numbers, combinations |
program line lookup | have |
Skipping optional program segments | have |
program switches | have |
Display | |
Display | Chinese, English |
Machining time and number of parts display | have |
Spindle speed, M/S command | have |
Dimension of main unit(mm) | |
Overall Dimension(H×W×T) | 400×265×80 |
Opening size (H×W) | 388×248 |
Avaliações
Ainda não existem avaliações.