- Colour: 红色，白色，蓝色，绿色，黑色
- High-concerned chemical: None
- Is Smart Device: No
- Application: Milling Machine
- Origin: Mainland China
1.1 System Overview
XC1000D engraving, milling, drilling and tapping multi-functional CNC system is a new generation CNC system developed by our company. Support carving, milling, drilling, tapping processing. It adopts 32-bit high-performance microprocessor, real-time multi-task control technology and hardware interpolation technology, full linkage, high-speed small line segment foresight algorithm. 0.001mm interpolation accuracy, maximum speed 30 m/min. It is the best choice for engraving machine, machining center, CNC milling machine and CNC drilling machine.
XC1000D numerical control system hardware and software features:
★ Based on 32-bit microprocessor, full linkage, 0.001mm interpolation accuracy, maximum speed of 30 m/min, support direction + pulse and orthogonal pulse.
★ International standard G instruction, compatible with FANUC system instruction.
★40 kinds of G instructions, support drilling cycle, tapping cycle.
★ Support RS485 absolute value servo.
★ Parts program full screen editing, built-in 512M mass program space, can store N parts program.
★ With USB interface, support U disk file read and write, data backup.
★ Input 24(expandable to 96) points, output 24(expandable to 96) points (custom), flexible and convenient.
★ Chinese and English operation interface, complete help information, more convenient operation.
★ The system adopts acceleration and deceleration control before interpolation.
★ Support knife length and radius knife repair.
★ Support hand wheel test processing, convenient program debugging.
★ Support multi-level operation rights, convenient device management, with a limited time system lock function.
★ Support UG, Mastercam, PowerMill, FeatureCAM, ArtCAM, JDPaint, Wenthai and other third-party software G code files.
★ Support self-programming knife library, flexible use of a variety of knife libraries.
basic function | |
Number of control axes | Axis 3 ~ 6 (x, y, Z, a, B, c) |
Number of linkage axes | Full linkage |
Tool magazine | Code library, need to edit |
principal axis | There are 2 analog spindles, of which |
Spindle monitoring | yes |
Minimum instruction unit | 0.001 mm |
Maximum instruction value | ±99999999×Minimum |
Rapid feed rate | 30000 mm / min |
Rapid feed rate | F0, 25%, 50%, 75%,100% |
Pulse mode | 1: Direction + pulse 2: quadrature pulse |
Maximum frequency | 100kHz, 200kHz, 500KHz can be set.(500KHz |
Rate feed rate | 0～150% |
Electronic gear ratio | 1～65535: 1～65535 |
Automatic acceleration and deceleration | yes |
Forward looking algorithm for high speed | yes |
Trial machining of handwheel | yes |
location | G00 (linear interpolation positioning) |
interpolation | Linear (G01), arc (G02 / G03 / G12), |
Return to reference point | Automatic return to reference point (G28) |
LCD | 7-inch TFT LCD with resolution of |
MDI software key | 8 |
Single step feed | x1，x10，x100 |
communication interface | U disk interface |
External handwheel interface | yes |
I / O interface | 24 / 24 (expandable to 96 / 96) |
Pause (SEC) | yes |
Quasi stop state | yes |
Accurate stop | yes |
Memory trip check | yes |
MDI operation | Yes, it supports multi segment operation |
reset | yes |
Trip switch | yes |
Single section operation | yes |
Program protection switch | yes |
Self diagnosis function | yes |
Emergency stop | yes |
Power Supply | Single phase AC220 V + 10% - 15%, 50 Hz ± |
Coordinate system | Machine coordinate system (g53), |
Automatic coordinate system setting | yes |
Decimal point input | yes |
Auxiliary function | |
Auxiliary function | M2 digit, M code user-defined, manual / |
Spindle function | |
Spindle function | Double spindle |
Digital spindle | Spindle 1 supports, occupies a digital |
tapping | support |
Spindle analog output | Yes, double spindle |
Tool function | |
Tool function | It supports automatic tool change, tool |
Tool compensation memory | -9999.999 ~ 9999.999, 99 |
Tool compensation | Knife length compensation and radius |
Edit operation | |
Editing function | Parameters, diagnosis bit input, program |
storage capacity | 512M |
Number of stored programs | 500 |
Display of program name | Chinese, English, numbers, combinations |
Program line lookup | yes |
Optional program skip | yes |
Program switch | yes |
display | |
display | Chinese, English |
Display of processing time and number of | yes |
Spindle speed, M / s command | yes |
XC1000D host size (mm) | |
Overall dimensions (height×wide×Thick) | 420 * 260 * 80 |
Opening size (height×Wide) | 393 x 233 |
Avaliações
Ainda não existem avaliações.