EVA Engraving Milling Cutter CNC Router Drill Bit Engraving End Mill EPS Foam Engraving , Used For CNC Shape Processing Tools

Features:
- Milling cutters, usually used for assembly on milling machines.
- High speed steel material, with excellent physical properties, high toughness, wear resistance, high speed cutting, long service life.
- Can milling wood, plastic, aluminum, etc.
- Can be directly machined or fine machined to the heat treated mold
- Suitable for CNC data processing center, fine engraving, high speed machine tools
- Reduce the number of tool change, improve the movement rhythm of machine tool actuator, save the time of mold manufacturing

Note:
- Please allow 1-5mm error due to manual measurement.
- The color of the item shown in the photo may be slightly different on the computer monitor.

Use the tooltip:
- To obtain better cutting surface and extend tool life.
Ensure use of high precision, high rigidity and dynamic balance.
1. Before using this tool, please measure the deflection of the tool.
When the deflection of the tool is greater than 0.01mm, correct it and then cut.
2. The shorter the extension of the tool, the better.
If the extension of the tool is too long, adjust the speed of the tool and feed rate or cutting amount.
3. If abnormal vibration or sound occurs during cutting, please reduce the spindle speed and cutting amount until the situation improves.
4. Spray or spray cooling of molten steel is the best method to maximize the effect of high-alumina titanium alloys. It is recommended to use stainless steel, titanium alloy or heat-resistant alloy for water-insoluble cutting fluids.
5, the above data is for reference only, cutting conditions according to the workpiece, machine and software influence stability

Applicable processing materials

Suitable for processing plastic, foam, polyurethane, polyethylene, etc.

Multi-blade edge design

All are delicately processed, 4 water chestnut and 6 water chestnut, long-lasting

Knife edge mirror design

Precision precision grinding, professional cutting edge design to improve processing efficiency

Strong wear resistance

High temperature quenching grinding production quality and service life increase

Tool selection

-In order to obtain a better cutting surface and extend tool life. Ensure high precision, high rigidity and dynamic balance.

1. Before using this tool, please measure the deflection of the tool. If the tool deflection is greater than 0.01mm, please correct it before cutting.

2. The shorter the extension line of the tool, the better. If the tool extends too long, please adjust the tool speed, feed rate or cutting amount.

3. If there is abnormal vibration or sound during cutting, reduce the spindle speed and cutting volume until the situation improves.

4. The steel parts adopt spray or jet cooling method to maximize the effect of high aluminum titanium. It is recommended to use stainless steel, titanium alloy or heat-resistant alloy with non-water-soluble cutting fluid.

5. The above data is for reference only. According to the influence of workpiece, machine and software, the cutting state is stable

Tool operation

⑵. This tool can process foam, EVA, EPS, etc. to produce a smooth surface.

⑶. A suitable size jacket must be used, because a jacket with serious wear, insufficient roundness, and insufficient inner hole taper cannot provide sufficient clamping force, which will cause vibration or break the tool handle and fly out.

⑷ Don't think that the new jacket must be safe and reliable. When the tool handle is found to have uneven contact marks or grooves after the tool is clamped, it indicates that the inner hole of the jacket has slippage and deformation. This is to change the jacket immediately to avoid accidents.

⑸ After the tool is clamped, if the tool is found to bounce during work, it should stop immediately, repeat the clamping several times, make the tool handle and the jacket fully contact, and then work.

⑹. The contact between the handle and the jacket should be good. The tool handle must be fully inserted into the jacket and tightened, so as to provide sufficient clamping force for the tool, not only a small part can be inserted into the jacket, otherwise it is easy to break the tool handle and the tool is damaged

⑺. Use appropriate eye and ear protection devices during operation.

⑻ Keep your body, clothes and other sundries away from working tools.