Precision Automatic Tool Sensor Z Axis Probe Tool Setting Gauge For CNC Routers Milling Engravers Touch Pressure Settings

Precautions for using the tool setter

1. Do not exceed the travel of the tool setter when touching, otherwise the tool will easily damage the tool setter(travel is 5mm)

2. When you touch the contact surface of the tool setter with your hand, do not let go immediately, so as not to damage the tool setter

The internal structure affects the efficiency and lifespan.

3. After the tool setting is completed, the tool must be lifted vertically away from the contact surface, and should not be moved laterally

Easily damaged tool setter

Tool setter installation instructions

1. The contact surface of the tool and the tool setter must be vertical, and contact the contact surface vertically downwards. Places with less iron filings on the workbench, so as not to affect the accuracy of the tool setter.

2. Within the rated voltage range, the voltage is controlled at DC10-30V, and the current is below 20mA. The temperature range is -25℃-70℃, the use effect is better.

3. The tool diameter should be controlled below 20mm, and the tool setting speed should be controlled at 50-200mm/min The center of the tool should fall on the center of the setting face.

Description of the scope of use

Jiatie, Beijing Jingdiao, Xindai, Baoyuan, Weihong, MACH3 and other CNC engraving machines, iron engraving machines, jade engraving machines, woodworking cutting machines, etc.

Dust and waterproof durable

Dustproof and waterproof design, it can still work stably under the condition of flying coolant and iron filings.

No need for built-in magnification

There will be no deviation caused by the temperature and power supply voltage fluctuations at the position of the tool setter, and can be directly input to the NC program

Alarm signal timely reflection

Send out an alarm signal in time when the overtravel is over, so as not to cause the equipment to operate.Other troubles, more convenient to use.

High precision and strong anti-interference

The protruding sharp corner of the tool directly contacts the tool tip related to the machining size, and the value size is measured and the signal is output, so the accuracy is higher than that of the average value obtained by converting the light amount and the electric quantity by the laser and energization method.