Descrição

3018 PlUS 30W Laser Engarver CNC Wood Router 500W Spindle Kit Milling Machine suitable for metal acrylic MDF Carving XILAIYUE

Feature:

☑ X, Y, Z working area: 300 x 180 x 60 mm (about 11.81 x 7.08 x 2.59 inch )

☑ Aluminum table area: 300 x 180 mm (about 11.81 x 7.08 inch )

☑ Frame: 390 x 320 x 250 mm (about 15.35 x 12.59 x 9.84 inch )

☑ Material: Aluminium

☑ Stepper motor: Apply to Nema17/23 42/57BYG Stepper motor

☑ Screw: T8anti-backlash nut, lead 4mm,

☑ Spindle hole diameter: 52mm

☑ Control board: 5.2 Multi-function control board

☑ Supported System: Win 7/8/10

☑ Supported Software: CANDLE 1.1, LASERGRBL, Weidiao and etc.

☑ Suppoted Material: Wood, acrylic, PVC, nylon, epoxy resin, glass fiber PCB board, POM, carbon fiber board

☑ Suppoted Material of Laser: wood, plastic, anodized aluminum, stainless steel (304, 201)

500W Kit:

Machine frame*1pc

500W spindle *1pc

500W power supply *1pc

3 axis controller *1pc

ER11 chuck 8mm *1pc

Collect 3.175mm *1pc

Plate * 4Pcs

Drill bit *10pcs

Assemble manual *1pc

Tools *1set

300W kit:

Machine frame*1pc

300W spindle *1pc

300W power supply *1pc

3 axis controller *1pc

ER11 chuck 8mm *1pc

Collect 3.175mm *1pc

Plate * 4Pcs

Drill bit *10pcs

Assemble manual *1pc

Tools *1set

Connect 3Pin Laser

1. 3pin wire connect to power supply

3Pin wire for power:

Brown--L

Blue--N

Yellow--E

2. Power supply connect to controller

Red&Black wire: Red”+”, Black”-”

Laser Wire：Red“+”Black“-”Yellow“PWM”

Power supply “+V”→Controller “48+”

Laser 3p →Controller Laser：3p

3.Controller connect to PC

Connect the controller to PC though the USB cable, it connects well after

“Ding-dong”, then open the software choose the right Port , after that the page will

become bright from grey which means connect well.

USBAM-mini5P（T）

4. connect power supply and press the controller switch

Controller switch: ON→“--” , Off→”O”

Press laser switch

Laser switch：Press: ON, Up:OFF

Laser Can Not Engrave:

Metal/Glass/PCB/Reflective Material/Transparent Material

15W Laser Can cut:

About 3mm wooden materials

Cutters can engrave:

plastic, wood, acrylic, pvc, pcb, wood or the like material

Note:

1.The laser cannot be used to carve or engrave mirror or reflective materials!

2. This kit is disassemble, needs the customer DIY assembling, needs certain electronic and the Mechanical Foundation.

if you need English Manual, pls leave me your e-mail, we would sent it to you, thank you very much.

Friendly Reminder:

ღ The spindle motor and laser cannot be connected at the same time

ღ The offline control board and the SUB data cable cannot be connected at the same time

ღ Turn on the power after the electrical connection is completed

ღ The positive and negative of the input power must not be reversed, and the reverse connection will burn

ღ The 48VDC interface cannot be connected to the switching power supply, and the voltage that can be passed through the DC seat of the control board cannot be greater than 5A

ღ If you can't find a satisfactory logistics channel above, please contact us

ღ If you need a lowdeclaration, please contact us. We are not response for everything if the package has any problems due to low declaration.

If you need limit switches with machine together, please click the link :

If you need Mach3 GRBL Z-probe, please click the link :

Note:

1.The laser cannot be used to carve or engrave mirror or reflective materials!

2. This kit is disassemble, needs the customer DIY assembling, needs certain electronic and the Mechanical Foundation.